Subscribe in a reader

Building A Barden Home

My step by step experience with Barden Homes

Paying For Your Barden Home

clock September 30, 2008 18:23 by author Donny Kemick

approved Probably the most nerve-wracking part of the Barden Home building process is working through how the payment process will go.  Again, I have never built a home before, so the entire process is new to me.  In fact, I think I may have come across like a complete idiot when I asked our salesman when i need to get a mortgage for the house :).

Construction Loan

Little did I know, that you don’t get a mortgage at the outset of the construction, you get a construction loan.  Construction Loans are much different than a mortgage, and rightfully so, since their term is much shorter.  During construction, the loan usually requires interest only payments.  The loan is usually due upon completion, which is indicated by a certificate of occupancy.

Rates are usually variable on construction loans, and interest is charged on the amount withdrawn to date.  Most construction loans allow a set number of draws, like 5, throughout the construction process.  These draws are scheduled based on the contractors’ needs as well as intervals the lender will allow.  Again, you only pay interest on the amount withdrawn to date.

You may be wondering how much money, if any, you need to put down on the construction loan.  In some cases, if you already own the land, the lender will allow you to use that as equity, therefore reducing the amount to be put down.  In general, putting down roughly 15% of the cost of construction is a good policy.

What Happens After Construction? A Mortgage!

When construction is complete, and you have made all of your draws, you have a couple of choices.  If you established a construction-to-permanent loan, where the construction loan turns into a mortgage, you simply get your certificate of occupancy, and begin making mortgage payments.

If you are doing two separate loans (construction and mortgage), when construction is complete, the lender that you are working with for your mortgage will want to appraise your new home to get a lendable value.  Just like buying a home, it is a good idea to put down 20% of the value of the home.  In this case, you will have put some money down on the house for the construction loan, so you are already part of the way there. 

Before the US housing market took a dive in the past year (as of this writing), it wasn’t uncommon to build a home, and have the value of the new construction be higher than the actual cost of the home.  This may be the case in some markets, but mine is probably not one of them. :).  I live in a very rural area, where real estate is inexpensive (compared to the national average), and appreciation is a slower process.

If you’re lucky enough to be in that situation, you will be required to put even less down on your home.  If not, and you already put down 15% of the value for your construction loan, you should only need to put down 5% of the value to make up a total of 20% of the value of the new home.  It’s never a bad idea to put down more if you can, but 20% will do.

Why 80% Loan to Value is Important

80-20-rule So, why is it such a big deal to put down 20% or more?  One word, RISK.  For starters, no matter how good your credit is, the more you put down, the less risk you bring to the table for the lender, with regard to defaulting on your mortgage.   Let’s face it, lenders are taking a serious look at risk/reward when handing out mortgages now.  With the recent take over of Fannie Mae and Freddie Mac by the US government, and the $700 Billion bailout of the financial system that’s being proposed (as of this writing), financial institutions have to be careful with how they lend. 

The more you put down, the lower your interest rate will be as well.  Again, this comes back to risk.  Between your credit score and history, and the amount you are putting down, you can represent more or less risk, having a direct relationship to your mortgage rate.

Private Mortgage Insurance

Lenders Mortgage Insurance (LMI) or Private Mortgage Insurance (PMI) is often avoided when you finance 80% or less of the value of the home.  Mortgage insurance is insurance paid by the borrower that protects the lender against non-payment, should you default on your loan.  Let me be clear.  This insurance doesn’t protect you, it protects the lender.  The only benefit the borrower gets is the ability to make a smaller down payment.  PMI is one of the big reasons many families can afford to buy a home, with 0-5% down.

Mortgage Insurance premiums vary, but on average they are 1/2 to 1 percent of the full loan amount, depending on the size of the down payment and loan specifics.    As an example, on a $200,000 loan with $10,000 down, you may pay $1000.00 per year in addition to your mortgage payments.  What’s worse, is that those payments aren’t even tax deductible in some areas.

In order to end your obligation to pay PMI, in most cases you must pay to have an appraisal done, and the outcome must show that your loan to value is under 80%.  This can be done by additions that increase the value of your home, rising market values, or simply paying down the loan.

Who Doesn’t Want a Lower Payment?

Although financial advisors will always tell you that if your mortgage rate is less than 10% (which it sure as heck better be!), you’re better off putting as little down as possible and investing the rest of your savings, I think there’s more to this decision than simple math.  You need to take into consideration your current income level, the potential for that to decrease/increase (most importantly decrease), and your actual ability to save the money not being put down on the mortgage. 

If you are self-employed, and the odds of you seeing a soft spot in your business cycle are great, I would recommend putting more money down and lowering your monthly obligation.  If you think the extra savings will burn a hole in your pocket, put it to good use, and spend it on  your home.

A very intelligent business man once told me, in business, you need to live off the valleys and save the peaks.  Make sure you get your monthly payment at a level where the financial valley’s in life can cover it.

Fixed Rate or Adjustable Rate Mortgages

Regardless of the loan to value you end up with, you’ll have the choice between a fixed rate or adjustable rate (ARM) mortgage.  Much like the name implies, your mortgage interest rate will either be the same for the term of your mortgage, or it will adjust over time.  You might be thinking to yourself, why the heck would it change over time?  Well, there’s a benefit to committing to an adjustable rate mortgage.  The interest rate for a short period, is fixed at a rate lower than the average fixed rate mortgages.  For example, if the current fixed rates for a 30 year mortgage are 6.25%,the short term fixed rate on an ARM maybe 6.0%.  After the fixed period, the rate can increase or decrease depending on the current Fed rates and other factors.  So, after the term for the lower rate ends, you may find yourself paying a much higher rate.

This is exactly what happened to the 1000s of people that are foreclosing on their homes.  The rates have gone up so much, that the borrower can no longer afford the payments.  During a time like we’ve had over the past 5+ years, it seems silly to go with anything besides a fixed rate mortgage because rates are very low right now.

If you think you can handle an ARM and your ability to refinance into a fixed rate after your short term rate is up is high, then by all means, give it a whirl.  Just be cautious of any rules stipulating charges for early payment.

More to Come

My wife an I are currently in the process of getting pre-approval for our construction loan, so I will post some updates as we go through that process.



Currently rated 1.5 by 13 people

  • Currently 1.461538/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5

The Role of the General Contractor

clock September 28, 2008 16:50 by author Donny Kemick

gc The entire building process is new to me, so I’ve learned a lot already, and we haven’t even broken ground.  When I found out that Barden Homes doesn’t send a crew to build your house, I learned that a General Contractor (GC) is used to manage the project.  As I mentioned in my previous post, the salesperson you get from Barden is often a general contractor as well, making it a streamlined process.  You don’t have to use the salesperson though.

Who’s In Charge Here???

The GC for your house building project is your single point of contact throughout the process.  Without a GC, you will have to line up an electrician, excavator, drywaller, etc…  all on your own.  You will also be in charge of directing and scheduling all of them, answering all of their questions, and individually  paying them.  That may be exactly what you want to do, but in my case, I’d rather let an expert deal with it. 

Often, your GC will already have connections with several subcontractors,  and may have leverage with them to get you better rates.  Our GC has built nearly 300 Barden Homes and has many subcontractors available along with his own crew.  We’re hoping that he can save us money on non-Barden materials, as well as squeeze his subcontractors a bit for better rates.

Picking Your GC

It’s important to note that you are open to pick whoever you would like to be your General Contractor.  If you have a friend or a trusted resource that is a general contractor, you’re welcome to have them do the work.  They DO NOT need to be familiar with the Barden process, as a Barden Home is built just like a stick-built home, with some parts being shipped to the work site, already constructed.

Second Opinions Keep People Honest

Even if you plan on using your salesperson or a GC that they recommend, it wouldn’t hurt to ask another GC to quote your build.  This will give you some perspective, as well ensure you’re getting an honest deal from your selected GC.  This will very likely be the biggest investment you will ever make, so you may as well cover all of your bases, and do your due diligence.

General Contractor Fees

I do not have extensive experience in the fees with general contractors, but the number I have been given is 3-4% of the Barden Homes materials cost.  This means, if your Barden materials cost $100,000.00, it would cost you $3,000.00-4,000.00 for the GC.  These rates will obviously vary, but that was the range I was given.


Be the first to rate this post

  • Currently 0/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5

Committing to One Floor Plan and Customizing It

clock September 28, 2008 05:10 by author Donny Kemick

floor-plan After narrowing your list down to 1 floor plan that you’d like to work with, you must make a one-time payment of $1000.00 to send the selected floor plan into Barden’s Engineers.  They will research your area’s building codes and laws, as well as work on any modifications to your floor plan.  That $1000.00 investment buys you as many iterations of changes to your plans as you want, and essentially gets you final, stamped plans.  If you have ever worked with an engineer on a floor plan, you know that stamped, final plans can run you up to 10 times what it costs through Barden Homes.

Turn Around Time

One of the hurdles we’ve experienced is the time it takes to get revisions to our plans back.  The Barden Engineers say it takes 7-9 business days to complete changes.  This includes even the smallest of changes, so try to submit changes in batches to avoid major delays.  That timeframe is very accurate.  It almost always takes a week+ to get our changes back. 

I understand that it takes time to make changes to the plans, but 7-9 days seems like forever!  Because I am an IT Consultant and Programmer, I am familiar with Autocad and other engineering suites.  It doesn’t take that long for changes to be made.  Ok, enough ranting on turn around time.


My wife and I have never built a home before and know very little about building codes, etc…  The engineers are able to help us in that regard by telling us if changes that we’ve requested are not up to code, or if they compromise the structure of the home.

Because they work on home designs every day, they have also recommended small changes here and there that will provide added convenience for us, or make a room more functional.

Modify, Modify, Modify Until You’re Happy

If you’re like my wife and I, you’re probably building your last home.  That’s all the more reason to take your time and modify the plans until you are 100% happy with them.  Make no compromises!  Heck, you paid your $1,000.00, take advantage of it!  The Barden Homes Engineers will work on your changes until you are happy, so hold them to it.

Time Spent Now Will Save Money Later

By making all of the changes before building starts, you assure yourself that you KNOW what the house is going to cost you.  That’s the biggest reason to iron out the details of the home before you go final with your plans.  If you ask anyone that has built a home, what costs the most money, they will likely tell you, straying from the plan, or making changes on the fly to how the house should be.  It wastes materials, and adds a lot to labor.

Do yourself a favor, plan as much as possible up front, and ensure that your final plans are truly final!

Technorati Tags: , Tags: ,

Currently rated 5.0 by 1 people

  • Currently 5/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5

Advertising Opportunities:

Contractor, Supplier, Builder? This blog may be a good source of targeted prospects.

Contact Me to discuss the options.

Heil & Andrews Construction

Advertise on Building A Barden Home

Advertise on Building A Barden Home

Advertise on Building A Barden Home

Advertise on Building A Barden Home